|
INFORMATION
Kits are made from Specially Formulated Aero-Flex Thermoset
ABS Material
Allows for more flexibility and
less breaking.
Factory-Like Fit And Finish
All Front and Rear Air Dams are "one piece
units".
No Exposed Screws Or Rivets To Mar The Appearance -- A True O.E.M. Look.
Aero-Flex, Easiest Material To Paint
Paint prep consists of
cleaning the parts with wax and grease remover, scuffing with Scotch-brite pads
(to promote paint adhesion), and priming. Apply 3 coats color and 2 coats
of clear. Use same procedure as though you were painting a new panel
bought from the car dealer.
Allows for perfect color match.
Easy Installation
All Parts Are Properly Labeled.
Kits come with 3M double-sided automotive
tape to secure the parts to the vehicle. The parts are then attached to
the inner fender wells or rocker panels with screws or rivets supplied with the
kit.
Molding kits to body.
Kits can also be molded to the body with the use of a 3M EASY SAND & FLEXIBLE
PARTS REPAIR KIT.
The part numbers are 5887, 5895 & 5896. These products seal the kits joints to
the body.
PLEASE NOTE: firberglass will not join plastic to metal, it eventually cracks
and comes apart.
Can be easily installed by the handy owner.
|
